Ancillary materials, concrete

Choice of category
Main category
Sub-category
Filtering
Length
  •   Length:
  •   Length:
Width
  •   Width:
  •   Width:
Height
  •   Height:
  •   Height:
Ø Drill-hole
  •   Ø Drill-hole:
  •   Ø Drill-hole:
Results filtered according to:
Results filtered according to:
No results were found for the filter!
Formwork breaking pin with screwed sleeve M6
Formwork breaking pin with screwed sleeve M6
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11700
Colour: Green Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M8
Formwork breaking pin with screwed sleeve M8
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11701
Colour: Blue Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M10
Formwork breaking pin with screwed sleeve M10
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11702
Colour: Yellow Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M12
Formwork breaking pin with screwed sleeve M12
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11703
Colour: Red Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M16
Formwork breaking pin with screwed sleeve M16
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11704
Colour: Black Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M20
Formwork breaking pin with screwed sleeve M20
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11705
Colour: Natural Amount Packaging: 1000 st.
Formwork breaking pin with screwed sleeve M24
Formwork breaking pin with screwed sleeve M24
Formwork breaking pin with screwed sleeve
  • Screw sleeve breakaway in formwork.
  • Screw-on sleeve.
  • Concrete pouring and stripping, part of the formwork breaks off.
  • Do not unscrew the threaded section until assembly is complete.
Article no: AT11706
Colour: Blue Amount Packaging: 500 st.
Synthetic screw block
Synthetic screw block
Synthetic screw block
  • For fixing window frames, stair railings and the like in concrete.
  • Both screw blocks can be attached to formwork using fixing pins (! only in two outer holes).
  • Drill holes ø 7 mm.
Article no: AT3200
Length: 37 mm Width: 14 mm Height: 30 mm
Synthetic screw block
Synthetic screw block
Synthetic screw block
  • For fixing window frames, stair railings and the like in concrete.
  • Both screw blocks can be attached to formwork using fixing pins (! only in two outer holes).
  • Drill holes ø 7 mm.
Article no: AT3840
Length: 43 mm Width: 18 mm Height: 37 mm
Plug for synthetic screw block
Plug for synthetic screw block
Synthetic screw block
  • For fixing window frames, stair railings and the like in concrete.
  • Both screw blocks can be attached to formwork using fixing pins (! only in two outer holes).
  • Drill holes ø 7 mm.
Article no: AT3850
Amount Packaging: 1000 st.