Magvast concrete system junction boxes
MVK40 Magvast Compact junction box Ø 19 mm
MVK40 Magvast Compact junction box Ø 19 mm
- Article no: AT4801
- EAN: 8712259252582
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Flush-mounting box for flush-mounting of special double-socket outlet with earthed earthing.
- Internal dimensions: 65 x 100 mm.
Halogen free
Yes
Amount Packaging
50 st.
Conduit diameter
19 mm
Inner size
40 mm
ETIM article class: Box/housing for built-in mounting in the wall/ceiling
Mounting method
Concrete building
Degree of protection (IP)
IP20
Material
Plastic
Width
70 mm
Length
108 mm
Diameter
Halogen free
Yes
Colour
Grey
Model
One and a half
Surface protection
Untreated
Circuit integrity
None
Cover model
None
Inner depth
40 mm
Degree of protection (NEMA)
-
Equipped with
-
Shape
Oval
Pipe locking
Yes
Construction type
Built-in installation box (device box)
Number of inlets
1
Air tight
No
For tube diameter
19 mm
Max. conductor cross section
6 mm²
Inlet from the rear
No
Transparent cover
No
Cover attachment
Snapped on
Sealable
No
With screening
No
Provided with revolving ring
No
Connectable
No
For number of electric fittings
1
Mounting switching equipment
Screwing
With screws
Yes
Housing feed-through by break-out opening
No
Housing feed-through by seal membrane
No
Housing feed-through by nozzle
No
Housing feed-through by step membrane
No
Pipe locking optional
No
Number of included spouts
Number of poles of the clamp
Clamp position fixed
No
Luminaire hook mounting
No
Nozzle
Tunnel branch pipe
With nail lugs
No
Special application
-
Product information
Magvast concrete system junction boxes
Attema's Magvast® concrete construction system is used mainly in concrete factories, but also on building sites. Magvast® works with magnets that are clamped into the boxes to prevent concrete water from entering the boxes. After measuring, the magnets are placed on which the box is then placed. After the formwork is removed, the magnet remains behind on the steel table or formwork, after which it can be removed and reused. Magvast® is then ready for the next cycle. It is a flexible system that does not damage the formwork. Attema has magnets for various types of boxes in its range. Magnets have a high clamping force (>100 kg). Suitable for steel formwork. Attached without drilling, so no damage to the formwork.
Download
