Magvast concrete system junction boxes

MVD50 Magvast Duo-box Ø 19 mm

MVD50 Magvast Duo-box Ø 19 mm
MVD50 Magvast Duo-box Ø 19 mm
  • AT4847
  • 8712259280592
  • Equipped with conical tube inlet with tube snapper.
  • Mounting screws: M3 x 18 mm.
  • Dimensions of the box is according to 2 coupled MV50 boxes.
Halogen free
Yes
Amount Packaging
50 st.
Conduit diameter
19 mm
Inner size
50 mm
ETIM article class: Box/housing for built-in mounting in the wall/ceiling
Mounting method
Concrete building
Degree of protection (IP)
IP20
Material
Plastic
Width
70 mm
Length
144 mm
Diameter
80 mm
Halogen free
Yes
Colour
Grey
Model
Double
Surface protection
Untreated
Circuit integrity
None
Cover model
None
Inner depth
50 mm
Degree of protection (NEMA)
-
Equipped with
-
Shape
Round
Pipe locking
Yes
Construction type
Device connection box (round/square)
Number of inlets
1
Air tight
No
For tube diameter
19 mm
Max. conductor cross section
6 mm²
Inlet from the rear
No
Transparent cover
No
Cover attachment
Snapped on
Sealable
No
With screening
No
Provided with revolving ring
No
Connectable
Yes
For number of electric fittings
2
Mounting switching equipment
Screwing
With screws
Yes
Housing feed-through by break-out opening
Yes
Housing feed-through by seal membrane
No
Housing feed-through by nozzle
No
Housing feed-through by step membrane
No
Pipe locking optional
No
Number of included spouts
Number of poles of the clamp
Clamp position fixed
No
Luminaire hook mounting
No
Nozzle
Tunnel branch pipe
With nail lugs
No
Special application
-
Additional technical data (ETIM)
Product information

Magvast concrete system junction boxes

Attema's Magvast® concrete construction system is used mainly in concrete factories, but also on building sites. Magvast® works with magnets that are clamped into the boxes to prevent concrete water from entering the boxes. After measuring, the magnets are placed on which the box is then placed. After the formwork is removed, the magnet remains behind on the steel table or formwork, after which it can be removed and reused. Magvast® is then ready for the next cycle. It is a flexible system that does not damage the formwork. Attema has magnets for various types of boxes in its range. Magnets have a high clamping force (>100 kg). Suitable for steel formwork. Attached without drilling, so no damage to the formwork.

Download
Product data sheet

MVD50 Magvast Duo-box Ø 19 mm

Order number: AT4847

Download