Pluggable installation in concrete

Floorbox B80

Floorbox B80
  • AT5310
  • 8712259386683
  • 2 inlets for 54 mm tube
  • 8 inlets for 19/20 and 34 mm tube
  • Performed with 2 bottom entries for 60 mm tube
  • With protective cover
Length
300 mm
Width
70 mm
Height
80 mm
Halogen free
Yes
Amount Packaging
25 st.
ETIM article class: Box/housing for built-in mounting in the wall/ceiling
Mounting method
Other
Degree of protection (IP)
IP20
Material
Plastic
Width
70 mm
Length
300 mm
Diameter
Halogen free
Yes
Colour
Grey
Model
Other
Surface protection
Untreated
Circuit integrity
None
Cover model
Construction protective cover
Inner depth
76 mm
Degree of protection (NEMA)
-
Equipped with
None
Shape
Rectangular
Pipe locking
Yes
Construction type
Cable junction box
Number of inlets
12
Air tight
No
For tube diameter
Other
Max. conductor cross section
Inlet from the rear
Yes
Transparent cover
No
Cover attachment
Snapped on
Sealable
No
With screening
No
Provided with revolving ring
No
Connectable
No
For number of electric fittings
Mounting switching equipment
-
With screws
No
Housing feed-through by break-out opening
Yes
Housing feed-through by seal membrane
No
Housing feed-through by nozzle
No
Housing feed-through by step membrane
No
Pipe locking optional
No
Number of included spouts
Number of poles of the clamp
Clamp position fixed
No
Luminaire hook mounting
No
Nozzle
Tunnel branch pipe
With nail lugs
No
Special application
None
Additional technical data (ETIM)
Product information

Pluggable installation in concrete

A large part of the installation can already be prefabricated in the concrete factory with the help of the Sparing boxes. There is enough space in the floor and wall boxes to store the excess length of the prefab cabling. As soon as the hull has been placed, the installation is plugged together in the floor and wall parts. All flush-mounted and central boxes are also pre-wired, so the connection of the switches and sockets can be performed very quickly. Non-load-bearing interior walls are powered from wired floor boxes. The flush-mounted boxes in these walls can therefore be connected quickly. Even more time savings are achieved by connecting the switches and sockets in these walls completely pluggable, by using prefab mounted switches and sockets in hollow wall boxes, known from 100% Winstallation. The floor boxes are also used as temporary storage for the cabling of the outgoing groups from the distribution board. As soon as the ditribution board is mounted, it is simply pluggable connected.

Download
Product data sheet

Floorbox B80

Order number: AT5310

Download
Brochure

Pluggable installation in concrete

197.4 KB | 2020-09-30

Select download