NXT SAW-22/22-H2 Distribution board

Article no: AT91029
EAN: 8712259559605

Width

220 mm

Height

250 mm

Number of groups (blue)

Number of groups (grey)

Number of earth fault switches 2P

Phases

1-phase wired

Groups

Main switch

40 A

Rated current

40 A

Mounting method

Surface mounted

Degree of protection (IP)

IP2XC

Width in number of modular spacings

Height

250 mm

Width

220 mm

Colour

Grey

RAL-number

7021

Release characteristic

Depth

110 mm

Type of covering

Cover

Number of rows

Extension possible

Yes

Housing material

Plastic

Number of phases

Lockable

Yes

Over voltage protection

Type of closure

Other

Built-in height

250 mm

Built-in width

220 mm

With transparent cover

Number of earth leakage switches 30 mA

Number of earth leakage switches 300 mA

Protection

Miniature-/earth leakage circuit breaker

Total number of groups

Number of direct groups

Number of light groups

Number of groups behind earth leakage switch

Number of earth leakage circuit breakers

Number of arc fault detection devices AFDD

Protection main switch

Yes

Number of poles main switch

Main switch rated current

40 A

Protection incoming RCD

Yes

Protection high integrity

Yes

Protection split load

Yes

Protection dual RCD

Yes

Number of outgoing ways

Suitable for data

Yes

Cooker group

None

Cooker group suitable as power current group

Yes

With socket outlet

With bell transformer

Type of over voltage protection device

With meter

Yes

Additional technical data (ETIM)

Add to the project list

Download product data sheet (PDF)

Installation 2.0 Click-mate NXT distribution boards

Especially for the Installation 2.0 concept, Attema has extended its range of Click-mate NXT distribution boards with a pluggable output bridge. The fully pre-wired pluggable output bridge can be fitted with up to 12 to 16 connections for single-phase end groups. Connections for electric cooking, mechanical ventilation or power groups have also been taken into account: space is reserved in the output bridge for up to 2 to 4 pieces of 5-pin flat connectors. All connectors are pre-wired with 2.5 mm² and equipped with locking latches as standard. Almost all "traditional" distribution boards can be equipped with a fully pre-wired output bridge with round connectors. Just like the standard distribution boards, Attema assembles the pluggable distribution boards completely as desired within a few days. Looking for a different configuration? Use the Click-mate NXT Assistant tool to assemble your own pluggable distribution box in no time. Or ask one of our sales staff about the possibilities.

Pluggable distribution box Click-mate NXT

Our partners assemble and test your products. The wholesaler delivers to the desired location and agreed time.

Install the Click-mate NXT Distribution Box Plug & Play.

Install efficiently.

Save time and prevent failure costs.

Installation 2.0

Installation 2.0 is a unique and innovative concept. Thanks to the extremely complete range, you can install 100% pluggable: from distribution box to switching material. All products are assembled according to your wishes, tested and, if desired, delivered per floor or unit to the agreed location and time. Plug in. Assemble. Done! With Install 2.0, you work three times faster on the construction site than with traditional installation. And you also reduce your failure costs by 90%.

Save time and prevent failure costs. Install the Click-mate NXT Distribution Box Plug & Play.

Wide range of pluggable cords, suitable for use in hollow spaces and maintenance-free according to EN-IEC 61535, equipped with Attema connectors.

Easily connect to the pluggable cable boxes equipped with Attema connectors.

Pluggable CW75 Central boxes, applicable in hollow ceiling constructions. Suitable for batten ceilings and metal stud ceilings, equipped with Attema connectors.