System magnet PLUS

Article no: 1299-70
EAN: 4013456578852

for correct positioning during automated production as well as automated removal and storage
with an anti-twist device for one-gang boxes
adhesive force 500 N (50 kg)
Can be used for the following articles:
HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
115 large slab ceiling box / item no. 1227-16
End and transition bushes / item no. 1261-82/-83/-84
Wall and ceiling transitions 30° / item no. 1261-92/-93/-94

Type of accessory/spare part

Other

Accessory

Yes

Spare part

Suitable for built-in installation box

Yes

Suitable for central conduit box

Yes

Additional technical data (ETIM)

Add to the project list

Download product data sheet (PDF)

HaloX® concrete installation housing (precast concrete)

System HaloX® is designed as a single piece for fitting in precast concrete. The housings can easily be aligned on the formwork table by means of markings on the housing. The housing with pre-fitted mineral fibreboard allows easy glueing and the housings can be turned by 360° on the formwork table even after glueing. Housings with pre-fitted front parts to hold the system magnet (Art. No. 1299-69/1299-70) are available for magnet attachment. Laying tolerances which may occur during the fitting of panel elements are compensated for via the housing sizes in connection with a variable cut-out area. Because of the compact dimensions of the housings, the reinforcement can easily be placed around the housing. For luminaires or loudspeakers with installation depths equal to or greater than 110 mm, the installation compartment of the HaloX® housings can be increased on the on-site concrete building site by means of extension rings. The fitting of the conduits on-site takes place without the need for tools for M20/M25 conduits without any internal shortening of the conduits.

For precast concrete slab ceilings and wall elements.
3 housing sizes with and without tunnel
Single-part housings with integrated mineral fibreboard for easy adhesive fixing
One-part housings with plastic panel for magnet attachment
Toolless entry technology for M20/M25 conduits
Compensation for laying tolerances on the concrete building site
Optimal heat management thanks to maximum surface contact with the concrete

Installation

Mounting of the single-piece housing with mineral fibreboard...

…fitting of the one-part housing by means of system magnet (Art. No. 1299-69/1299-70).

Prefabricated element with integrated HaloX® housings is laid on concrete building site.

Subsequent adjustment of the housing height on the building site.

Toolless combination entry of M20/M25 conduits with conduit stop - no later shortening of the conduits.

After fitting of the conduits, concreting on the planned ceiling thickness takes place with the on-site mixed concrete process.

Panel element laying tolerances can be compensated for using the universal front parts (see system overview).

Cut the installation opening e.g. with the MULTI 4000 (Art. No. e.g. with 1083-10).

One system magnet for all applications.

The system magnet is suitable for all installation parts required in wall and ceiling production to prepare the electrical installation in-factory. The system magnet can be used for correct positioning in both manual and automated production. In automated production, the magnet can be placed on the formwork table automatically and in the correct position using the multifunction gripper. The PLUS system magnet can also be removed and magazined automatically.