HaloX® concrete installation housing (precast concrete)

HaloX® 250 for precast concrete for magnet attachment

HaloX® 250 for precast concrete for magnet attachment
HaloX® 250 for precast concrete for magnet attachment
  • 1283-74
  • 4013456548466
  • One-part housing for holding the system magnet (Art. No. 1299-69) and system magnet PLUS (Art. No. 1299-70)
  • Toolless combination entry for M20/M25 conduits
  • Conduit entry limitation to prevent the need to shorten the conduit inside
  • Suitable with signal cover
ETIM article class: Accessories/spare parts for luminaire mounting box
Type of accessory/spare part
Universal front piece
Spare part
Additional technical data (ETIM)
Product information

HaloX® concrete installation housing (precast concrete)

System HaloX® is designed as a single piece for fitting in precast concrete. The housings can easily be aligned on the formwork table by means of markings on the housing. The housing with pre-fitted mineral fibreboard allows easy glueing and the housings can be turned by 360° on the formwork table even after glueing. Housings with pre-fitted front parts to hold the system magnet (Art. No. 1299-69/1299-70) are available for magnet attachment. Laying tolerances which may occur during the fitting of panel elements are compensated for via the housing sizes in connection with a variable cut-out area. Because of the compact dimensions of the housings, the reinforcement can easily be placed around the housing. For luminaires or loudspeakers with installation depths equal to or greater than 110 mm, the installation compartment of the HaloX® housings can be increased on the on-site concrete building site by means of extension rings. The fitting of the conduits on-site takes place without the need for tools for M20/M25 conduits without any internal shortening of the conduits.

  • For precast concrete slab ceilings and wall elements.
  • 3 housing sizes with and without tunnel
  • Single-part housings with integrated mineral fibreboard for easy adhesive fixing
  • One-part housings with plastic panel for magnet attachment
  • Toolless entry technology for M20/M25 conduits
  • Compensation for laying tolerances on the concrete building site
  • Optimal heat management thanks to maximum surface contact with the concrete


Mounting of the single-piece housing with mineral fibreboard...

…fitting of the one-part housing by means of system magnet (Art. No. 1299-69/1299-70).

Prefabricated element with integrated HaloX® housings is laid on concrete building site.

Subsequent adjustment of the housing height on the building site.

Toolless combination entry of M20/M25 conduits with conduit stop - no later shortening of the conduits.

After fitting of the conduits, concreting on the planned ceiling thickness takes place with the on-site mixed concrete process.

Panel element laying tolerances can be compensated for using the universal front parts (see system overview).

Cut the installation opening e.g. with the MULTI 4000 (Art. No. e.g. with 1083-10).

Product data sheet

HaloX® 250 for precast concrete for magnet attachment

Article no: 1283-74