K25/P25 Accessories

Choice of category
Main category
Sub-category
Filtering
diameter
  •   diameter:
  •   diameter:
Conduit diameter
  •   Conduit diameter:
  •   Conduit diameter:
Results filtered according to:
1 From 4
Results filtered according to:
No results were found for the filter!
BC25 Wall clip
BC25 Wall clip
K25/P25 Accessories
  • Wall clips allow 'invisible' attachment of K25 conduit to walls or ceilings.
  • A limited degree of change of direction is possible.
  • Only suitable for K25.
Order number: AT5600
Amount Packaging: 10 x 100 st.
DH25 Wire clip
DH25 Wire clip
K25/P25 Accessories
  • The wire clips secure the installed wiring.
Order number: AT5590
Colour: Red Amount Packaging: 10 x 100 st.
KC25 Data-cable clip
KC25 Data-cable clip
K25/P25 Accessories
  • The cable clips secure the installed ICT wiring (max. 2x UTP, FTP or STP).
  • This clip makes the installation of ICT cabling quick and easy.
  • Suitable for K25/P25/Z25 conduit.
Order number: AT5591
Amount Packaging: 10 x 100 st.
ZC25 Double socket white (RAL 9010)
ZC25 Double socket white (RAL 9010)
K25/P25 Accessories
  • 2-pin with rim earthing.
  • 16A / 250V~ with plug-in contacts for solid conductors.
  • Consists of base plate with pre-assembled element, cover and mounting hardware.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 95 x 64 x 51mm
Order number: AT5582
Colour: White (RAL 9010) Amount Packaging: 10 st.
ZC25 Double socket cream (RAL 1013)
ZC25 Double socket cream (RAL 1013)
K25/P25 Accessories
  • 2-pin with rim earthing.
  • 16A / 250V~ with plug-in contacts for solid conductors.
  • Consists of base plate with pre-assembled element, cover and mounting hardware.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 95 x 64 x 51mm
Order number: AT5580
Colour: Cream (RAL 1013) Amount Packaging: 10 st.
WS25 Two-way switch white (RAL 9010)
WS25 Two-way switch white (RAL 9010)
K25/P25 Accessories
  • 10AX / 250V~ with plug-in contacts for solid conductors.
  • Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 64 x 64 x 46 mm.
Order number: AT5576
Colour: White (RAL 9010) Amount Packaging: 10 st.
WS25 Two-way switch cream (RAL 1013)
WS25 Two-way switch cream (RAL 1013)
K25/P25 Accessories
  • 10AX / 250V~ with plug-in contacts for solid conductors.
  • Consists of base plate with pre-assembled element, cover, rocker operation and mounting hardware.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 64 x 64 x 46 mm.
Order number: AT5574
Colour: Cream (RAL 1013) Amount Packaging: 10 st.
DP25 single data point Cat 5e white (RAL 9010)
DP25 single data point Cat 5e white (RAL 9010)
K25/P25 Accessories
  • Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
  • Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
  • Application possible in combination with K25/P25 or Z25/F25 duct.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 64 x 64 x 51 mm
Order number: AT5594
Colour: White (RAL 9010) Amount Packaging: 10 st.
DP25 single data point Cat 5e cream (RAL 1013)
DP25 single data point Cat 5e cream (RAL 1013)
K25/P25 Accessories
  • Consists of base plate, cap, Cat 5e RJ45 jack with toolless cutting contacts for data cable connection, transparent mounting plate with simple click installation of RJ45 jack, cover with dust cap and mounting hardware.
  • Mounting plate and cover can be rotated for both horizontal and vertical application, so that the RJ45 jack and dust cap are always in the correct position.
  • Application possible in combination with K25/P25 or Z25/F25 duct.
  • Open inlet for flat duct, no separate inlet piece required. Flat duct inlet on other side can be knocked out.
  • Integrated stop on base plate for duct and cover.
  • Overlaps duct cover by 5mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Knockout in the base plate for rear inlet of duct Ø16mm.
  • Dimensions: 64 x 64 x 51 mm
Order number: AT5592
Colour: Cream (RAL 1013) Amount Packaging: 10 st.
PR25 Plusrand white (RAL 9010)
PR25 Plusrand white (RAL 9010)
K25/P25 Accessories
  • Expand with flat duct system while retaining existing single built-in switch hardware.
  • Plusrand can be mounted on any single back box with 60mm pitch.
  • Extra long M3x30mm screws supplied for support frame mounting.
  • Easy mounting and alignment of support frame on Plusrand.
  • Equipped with 1 open inlet for K25/P25/Z25 duct. Inlet on other side can be knocked out.
  • Integrated stop for duct and cover.
  • Overlaps duct cover by 10mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Dimensions: 85 x 85 x 15 mm.
Order number: AT5734
Colour: White (RAL 9010) Amount Packaging: 30 st.
PR25 Plusrand cream (RAL 1013)
PR25 Plusrand cream (RAL 1013)
K25/P25 Accessories
  • Expand with flat duct system while retaining existing single built-in switch hardware.
  • Plusrand can be mounted on any single back box with 60mm pitch.
  • Extra long M3x30mm screws supplied for support frame mounting.
  • Easy mounting and alignment of support frame on Plusrand.
  • Equipped with 1 open inlet for K25/P25/Z25 duct. Inlet on other side can be knocked out.
  • Integrated stop for duct and cover.
  • Overlaps duct cover by 10mm. Purely right-angled sawing and sawing to size of the cover is not necessary.
  • Dimensions: 85 x 85 x 15 mm.
Order number: AT5733
Colour: Cream (RAL 1013) Amount Packaging: 30 st.
A25 Expansion box white (RAL 9010)
A25 Expansion box white (RAL 9010)
K25/P25 Accessories
  • Base plate can be mounted on any wall or ceiling junction box.
  • Parker screws for attachment of cover are mounted inside cover to prevent loss.
  • Surface-mount domestic switching devices can be mounted on cover.
  • Cover includes 1 open lead-in and 11 break-outs for K25/P25/Z25 raceways.
  • Size 90 x 90 x 15 mm.
Order number: AT5618
Colour: White (RAL 9010) Dimensions: 90 x 90 x 15 mm (lxwxh) Amount Packaging: 5 x 10 st.
1 From 4