Flush-mounted boxes Hollow Wall

Category selection
Main category
Sub-category
Filtering
Halogen free
  •   Halogen free:
diameter
  •   diameter:
Inner size
  •   Inner size:
  •   Inner size:
  •   Inner size:
Conduit diameter
  •   Conduit diameter:
  •   Conduit diameter:
  •   Conduit diameter:
Results filtered according to:
1 From 5
Results filtered according to:
No results were found for the filter!
SHW50 Hollewand inbouwdoos loodvrij
SHW50 Hollewand inbouwdoos loodvrij
Flush-mounted boxes Hollow-wall
  • Protection against X-rays up to a maximum lead equivalent of 3 mm Pb.
  • Suitable for lead-free radiation protection walls (e.g. Knauf Safeboard).
  • Lead-free, harmless to health.
  • Can be installed in closed walls.
  • Rapid installation without additional protective measures.
  • Back to back mounting possible.
  • Halogen-free.
Article no: AT1147
Amount Packaging: 10 st.
SHW50 Hollewand inbouwdoos loodhoudend
SHW50 Hollewand inbouwdoos loodhoudend
Flush-mounted boxes Hollow-wall
  • Protection against X-rays up to a lead equivalent of max. 2.5 mm Pb.
  • Suitable for lead-lined radiation protection walls.
  • Harmless to health, no skin contact with lead component.
  • Can be installed in closed walls.
  • Rapid installation without additional protective measures.
  • Back to back mounting possible.
  • Halogen-free.
Article no: AT1148
Amount Packaging: 10 st.
UHW50-BW / RD rookdichte Hollewand inbouwdoos Ø 16/19 mm
UHW50-BW / RD rookdichte Hollewand inbouwdoos Ø 16/19 mm
Flush-mounted boxes Hollow-wall
  • Smokeproof :Sa and S200.
  • Soundproofed.
  • Maximum 90 minutes fire resistant in an insulated wall.
  • Maximum 60 minutes fire resistant in a non-insulated wall.
  • Tested in a non-load-bearing wall construction with 2 x 12,5 mm plasterboard panels on both sides.
  • Halogen-free.
  • Equipped with 2 conical tube inlets with integrated locking for both 16 and 19 mm tube.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Distance to pipe inlet: 29 mm
Article no: AT1115
Amount Packaging: 25 st.
UHW50-BW brandwerende Hollewand inbouwdoos Ø 16/19 mm
UHW50-BW brandwerende Hollewand inbouwdoos Ø 16/19 mm
Flush-mounted boxes Hollow-wall
  • Maximum 90 minutes fire resistant in an insulated wall.
  • Maximum 60 minutes fire resistant in a non-insulated wall.
  • Tested in a non-load-bearing wall construction with 2 x 12,5 mm plasterboard panels on both sides.
  • Halogen-free.
  • Equipped with 2 conical tube inlets with integrated locking for both 16 and 19 mm tube.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Distance to pipe inlet: 29 mm
Article no: AT1069
Amount Packaging: 25 st.
UHW50 Hollow wall junction box Ø 16/19 mm
UHW50 Hollow wall junction box Ø 16/19 mm
Flush-mounted boxes Hollow-wall
  • Plate 1 - 27.5 mm.
  • Plasterboard 9.5 - 27.5 mm.
  • Also applicable in concrete blocks with a pipe slot (MBI B2 blocks).
  • Equipped with 2 conical tube inlets with integrated locking for both 16 and 19 mm tube.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Distance to pipe inlet: 29 mm
Article no: AT1081
Amount Packaging: 100 st.
Ø 16/19 mm, halogen free
Ø 16/19 mm, halogen free
Flush-mounted boxes Hollow-wall
  • Halogen-free.
  • Plate 1 - 27.5 mm.
  • Plasterboard 9.5 - 27.5 mm.
  • Also applicable in concrete blocks with a pipe slot (MBI B2 blocks).
  • Equipped with 2 conical tube inlets with integrated locking for both 16 and 19 mm tube.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Distance to pipe inlet: 29 mm
Article no: AT1092
Amount Packaging: 100 st.
UHW50 Hollow wall junction box for cable Ø 8 14 mm
UHW50 Hollow wall junction box for cable Ø 8 14 mm
Flush-mounted boxes Hollow-wall
  • Plate 1 - 27.5 mm.
  • Plasterboard 9.5 - 27.5 mm.
  • Also applicable in concrete blocks with a pipe slot (MBI B2 blocks).
  • Equipped with 2 x Cable Strain relief.
  • Cable Strain relief provided with strain relief of 20N.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Cable strain relief suitable for cable and cord Ø 8 to 14 mm.
  • Distance to pipe inlet: 29 mm
Article no: AT1094
Amount Packaging: 100 st.
UHW50 Hollow wall junction box for cable, halogen-free Ø 8 14 mm
UHW50 Hollow wall junction box for cable, halogen-free Ø 8 14 mm
Flush-mounted boxes Hollow-wall
  • Halogen-free.
  • Plate 1 - 27.5 mm.
  • Plasterboard 9.5 - 27.5 mm.
  • Provided with 2 x Cable strain relief suitable for cable / cord Ø 8 - 14 mm.
  • Strain relief meets standard 20N.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
  • No gap formation between switchgear and wall due to very thin, solid support edge of the metal fasteners.
  • Distance to pipe inlet: 29 mm
Article no: AT1096
Amount Packaging: 100 st.
UHW50-BW / RD smokeproof hollow wall junction box for cable/cord 6 - 10 mm
UHW50-BW / RD smokeproof hollow wall junction box for cable/cord 6 - 10 mm
Flush-mounted boxes Hollow-wall
  • Halogen-free.
  • Plate 1 - 35 mm.
  • Plasterboard 9.5 - 27.5 mm.
  • Equipped with 2 x Cable inlets Ø 6 - 10 mm.
  • Firm mounting of the box in the wall thanks to the metal screw plates with 3-fold pitch.
Article no: AT1122
Amount Packaging: 25 st.
1 From 5