- Equipped with conical tube inlet with tube snapper.
- Including 2 M3 screws.
- Equipped with conical tube inlet with tube snapper.
- Including 2 M3 screws.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Flush-mounting box for flush-mounting of special double-socket outlet with earthed earthing.
- Internal dimensions: 65 x 100 mm.
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 screws.
- 2 conical tube entries with tube snapper; one of which is closed by a breakout port.
- Including 2 M3 screws.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Dimensions of the box is according to 2 coupled MV50 boxes.
- Equipped with conical tube inlet with tube snapper.
- Mounting screws: M3 x 18 mm.
- Applicable in wide slab floors.
- Distance from underside of pipe entries to open side of the box: 60 mm.
- Concrete water ingress into the pipe inlets is prevented by tape.
- Protective cover (art.no. AT4818) and adhesive cover (art.no. AT4850) available separately.
- Matching lids for assembly: art.no. AT5010 and AT5011.
- Applicable in wide slab floors.
- Distance from underside of pipe entries to open side of the box: 60 mm.
- Concrete water ingress into the pipe inlets is prevented by tape.
- Protective cover (art.no. AT4818) and adhesive cover (art.no. AT4850) available separately.
- Matching lids for assembly: art.no. AT5010 and AT5011.
- Applicable in wide slab floors.
- Distance from underside of pipe entries to open side of box: 80 mm.
- Concrete water ingress into the pipe inlets is prevented by tape.
- Protective cover (art.no. AT4818) and adhesive cover (art.no. AT4850) available separately.
- Matching lids for assembly: art.no. AT5010 and AT5011.
- Applicable in wide slab floors.
- Distance from underside of pipe entries to open side of box: 80 mm.
- Concrete water ingress into the pipe inlets is prevented by tape.
- Protective cover (art.no. AT4818) and adhesive cover (art.no. AT4850) available separately.
- Matching lids for assembly: art.no. AT5010 and AT5011.
- Equipped with conical tube inlet with tube snapper.
- Applicable for floor-wall connections/connections and floor-meter box connections/connections.
- Quick and easy realisation of a relevant end.
- Without unnecessary bends, easy wire pulling.