Magvast concrete system junction boxes

MD-CD100R centre ceiling box

MD-CD100R centre ceiling box
  • AT1036
  • 8712259545158
  • Can be used in wide boarded floors.
  • Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
  • The penetration of concrete water into conduit entries is prevented by adhesive tape.
  • Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
  • Suitable covers for mounting: Art. no. AT5010 and AT5011.
Halogen free
Yes
Amount Packaging
36 st.
Conduit diameter
16 / 19 mm
Ø circular saw
80 mm
Outer size
105 mm
ETIM article class:
Mounting method
Concrete building
Degree of protection (IP)
IP20
Material
Plastic
Width
Length
Diameter
77 mm
Halogen free
Yes
Colour
Grey
Model
Single
Surface protection
Untreated
Circuit integrity
None
Cover model
None
Inner depth
100 mm
Shape
Round
Pipe locking
No
Construction type
Central conduit box
Number of inlets
8
Air tight
No
For tube diameter
16/19 mm
Max. conductor cross section
6 mm²
Inlet from the rear
No
Transparent cover
No
Cover attachment
Snapped on
Sealable
No
With screening
No
Provided with revolving ring
No
Connectable
No
Suitable for wall/board thickness
70 - 80 mm
For number of electric fittings
With screws
No
Housing feed-through by break-out opening
Yes
Housing feed-through by seal membrane
Yes
Housing feed-through by nozzle
No
Housing feed-through by step membrane
No
Pipe locking optional
No
Number of included spouts
Number of poles of the clamp
Clamp position fixed
No
Luminaire hook mounting
No
Nozzle
Tunnel branch pipe
With nail lugs
No
Special application
None
Additional technical data (ETIM)
Product information

Magvast concrete system junction boxes

Attema's Magvast® concrete construction system is used mainly in concrete factories, but also on building sites. Magvast® works with magnets that are clamped into the boxes to prevent concrete water from entering the boxes. After measuring, the magnets are placed on which the box is then placed. After the formwork is removed, the magnet remains behind on the steel table or formwork, after which it can be removed and reused. Magvast® is then ready for the next cycle. It is a flexible system that does not damage the formwork. Attema has magnets for various types of boxes in its range. Magnets have a high clamping force (>100 kg). Suitable for steel formwork. Attached without drilling, so no damage to the formwork.

Download
Product data sheet

MD-CD100R centre ceiling box

Article no: AT1036

Download