Flush-mounted boxes & accessories

U50 junction box

U50 junction box
  • AT1102.01
  • 8712259577074
  • Removable, flexible abdominal spout.
  • Drill-hole Ø 82 mm.
  • Suitable for conduit 16, 19 and 20 mm.
  • Fastening screws M3 x 20 mm.
  • 360º degree rotating ring.
  • Halogen-free.
Amount Packaging
100 st.
Ø circular saw
82 mm
Inner size
50 mm
ETIM article class: Box/housing for built-in mounting in the wall/ceiling
Mounting method
Flush-mounted
Degree of protection (IP)
IP20
Material
Plastic
Width
Length
Diameter
80 mm
Halogen free
Yes
Colour
Grey
Model
Single
Surface protection
Untreated
Cover model
Construction protective cover
Inner depth
50 mm
Degree of protection (NEMA)
-
Circuit integrity
None
Equipped with
-
Shape
Round
Pipe locking
No
Construction type
Built-in installation box (device box)
Number of inlets
5
Air tight
No
For tube diameter
16/19/20 mm
Max. conductor cross section
6 mm²
Inlet from the rear
Yes
Transparent cover
Yes
Cover attachment
Snapped on
Sealable
No
With screening
No
Provided with revolving ring
Yes
Couplable
Yes
For number of electric fittings
1
Mounting switching equipment
Screwing
With screws
Yes
Number of non-adjustable device fixing lugs
Number of adjustable device fixing lugs
Housing feed-through by break-out opening
Yes
Housing feed-through by seal membrane
No
Housing feed-through by nozzle
No
Housing feed-through by step membrane
No
Pipe locking optional
No
Number of included spouts
Number of poles of the clamp
Clamp position fixed
No
Luminaire hook mounting
No
Nozzle
Tunnel branch pipe
Special application
None
With partition panel
Yes
Compliant with BS 4662
Yes
Additional technical data (ETIM)
Product information

Flush-mounted boxes & accessories

The complete line of flush-mounted boxes offers you the best, fastest installation in every situation. The traditional boxes are suitable for installation in materials such as calcium silicate brick, solid gypsum and cellular concrete. For every challenge there is a problem-solving flush-mounted box available from Attema. An advanced selection of parts completes the assortment.

Less chopping, thanks to the flexible combination spout.

Installation without quick plaster, due to the clamping effect.

Combination nozzle suitable for 3 pipe inlet sizes, namely 16 mm, 19 mm and 20 mm.

Combi-tuit suitable for 3 sizes of pipe inlet, namely 16 mm, 19 mm and 20 mm.

DUO-Combituit also available. Suitable for 16 mm, 19 mm and 20 mm.

The Duo box is also easy to assemble without quick plaster.

Easily connect the flush-mounting box to the flush-mounting box for a suitable solution.

Download
Product data sheet

U50 junction box

Article no: AT1102.01

Download
Brochure

U-inbouwdozen

Product recommendations
Similar products
U50 junction box
Article no: AT1224.01